Product description

Use biocides safely. Read the label and the product information before use.

Product usage

1 Use as a disinfectant: The product is effective against a number of bacteria and fungi. In vitro, it is also effective against Trichophyton interdigitale. First thoroughly clean the surfaces and materials to be disinfected. Then rinse the cleaning agent used in this process with clean water. Remove any excess liquid. If treated surfaces or materials come into contact with food or drink, thorough rinsing with clean water is required after the treatment time has elapsed. Minimum action time: 5 minutes.

For use in places where food and drink are prepared, handled or stored, and for general use, the concentration of use is 8.0 ml per liter of water (1:125). Attention: Use of the product may lead to the selection of bacterial strains that are resistant to it.

2 Fighting green algae
For the removal of green stains on windows and materials in empty greenhouses and department stores. Deeply spraying or brushing with a solution of 5% of this product (5 L per 100 liters of water). After a few days, remove dead algae, algae, dirt, etc. by spraying or scrubbing with a hard jet. This cleaning after-treatment does not necessarily have to be done in the short term, because this product has no harmful effects or vaporizing effects. For these reasons, treatments can also be carried out as early as a short time before planting.

To prevent green stains on windows and materials in empty greenhouses and department stores. -Spray on clean windows with a solution of 5% of this product (5 L per 100 liters of water). Due to the absence of harmful effects of this product and the small amount of residue, it should not be sprayed again. This method prevents the formation of green deposits for many months. -If windows (e.g. flat glass) are cleaned by hand (by wiping off the dirt), a solution of 3% (300 mL per 10 liters of water) may suffice.

For removal and prevention of green stains on walls, roofs, tiled paths, flagstones, gravestones, windows, railings, garden furniture, etc. Spray, pour, brush or scrub with a solution of 5% of this product (500 mL per 10 liters of water). Do not rinse. Do not spray or pour on plants.

3. Prevention of bacteria and algae in waterbeds.
To prevent algae and bacteria growth in waterbeds, as well as the turbidity of the water, this product should be added to fresh water at a dosage of 100 mL per 300 L of water (15 ppm active substance). When refilling or replenishing, this product should be added to the water used previously in the same ratio.

Keep pets away from the treated areas, as long as they are still wet. Note: The product becomes ineffective when
it comes into contact with soap or synthetic detergents.