Product usage

External surfaces:
First thoroughly clean the surfaces to be disinfected. Rinse the cleaning agent used for this thoroughly with clean water. Remove any excess water. Wet the surface with a solution of the agent in water using, for example, a sponge, brush or sprayer (fine mist). Rinse the surface after the working time has elapsed with clean water and allow it to dry. Dosage: 5 g of product/L water. Note: Add the formulation to water; do not add water to the formulation. When preparing the solution, gloves and protective clothing should be worn. Minimum working time: 5 minutes.

Internal surfaces of (process-)equipment:
The product may only be used with suitable dosing equipment for disinfecting the interior of process equipment. The internal surfaces to be disinfected must first be thoroughly cleaned. Rinse the disinfectant used in this process with clean water. Remove any excess water. Fill the equipment with a solution of the product in water. Rinse the equipment with clean water after the working time has elapsed. Dosage: 5 g of product/L water. Note: Add the formulation to water, not the other way around. When preparing the solution, gloves and protective clothing must be worn.
Minimum incubation time for bacteria, yeasts and fungi: 5 minutes.
Minimum incubation time for bacteria traces: 60 min.

N.B.
– avoid contact with oxidizable metals, organic material and organic substances or strongly reducing substances.
– dispose of the waste into a treatment facility, possibly after neutralization with a suitable reducing agent.