Product description

Due to the use of, among other things, solvents, the product is very suitable for removing, among other things, rubber traces, mineral oils and fats.

Product usage

Method of Sop: For normal contamination, dose 10 ml of product per liter of cold water. Replenish this water regularly if necessary. Increase the dosage for heavy contamination to a maximum of 50 ml per liter of water and rinse with clean water.

Spot removal: Preferably use as a pre-treatment. Dose a maximum of 50 ml per liter of water. Spray the rubber directly onto the contamination. Allow to work for a few minutes and then rinse thoroughly with plenty of clean water. Note: It does not remove discoloration caused by ingrained rubber marks and rubber streaks.

Stripping: Use a dosage of 100 ml per liter of water. Apply the product using a mop or a roller machine. Work in areas of 25 m² at a time and allow the product to work for about 20 minutes. Increase the dosage for heavier contamination to a maximum of 200 ml per liter of water. Note: Ensure that the product does not dry out. Remove the loose emulsion using a vacuum cleaner and rinse the floor 1 to 2 times with sufficient clean water and then allow the floor to dry thoroughly (pore depth). After that, the new polymer emulsion can be applied if necessary.

After use: Make sure the packaging is empty (free of debris) and deliver it to your supplier or the plastic waste so that it can be recycled.