Product description

Very widely applicable product, so it can be used for removing limescale from heat appliances, such as coffee machines, kettles, etc. But also for removing limescale stains from various surfaces and floors, e.g. in the kitchen or bathroom. And for cleaning pipe systems, but also as a pH neutraliser, e.g. for floor maintenance.

Product usage

Descaler: Follow the supplier’s instructions for use. For manual use: Switch off the device and fill the water tank with the product. Let it work for a while (approx. 10 minutes) and then empty the water tank, rinse and fill it with sufficient clean water.

Removal of limescale spots: Moisten the spot with plenty of water and dose a small amount of product on the stain. Let it act for up to 5 minutes and rinse with plenty of clean water. Neutralise the surface with an alkaline product (e.g. degreaser) and rinse again. Caution! Dose as little as possible and increase the dosage gradually in case of heavhy soil. Too high a dosage can cause irreversible damage!

Cleaning of pipe systems: use a dosage of 200 ml per litre of water. Allow this solution to soak up through the pipe and rinse the entire pipe with plenty of clean water.

pH neutraliser: dose, 100ml of product per litre of lukewarm water. Apply with a watering can and brush in with a mop or broom. Let it soak in for a while (about 5 minutes) and spray after with a high-pressure cleaner and plenty of clean water. Remove excess water with a stripper.

After use: Make sure the packaging is empty (drip-free) and return it to your supplier or put it in the plastic waste so that it can be recycled.